The HT400 ozone analyzer was developed by HealthyPhoton based on our experiences in trace gas analysis. The instrument can be widely used in ozone concentration analysis for environmental and air pollution monitoring. It also can be used in meteorology, disinfection, food safety, and other fields that need to carry out ozone concentration detection. The instrument is stable and reliable. It has been chosen by many clients.
Product Features
- High portability, low power consumption
- High reliability and NIST traceability calibration report available
- Low cost
Product Parameter
Measurement range |
Optional analog output ranges: from 0 to 1/10/100 PPM |
Analog output |
4-20mA or 0-1VDC or 1-5VDC |
Output unit |
ppb, ppm, mg/m3, mg/m3 |
Time for starting up |
5 Min |
Resolution |
Minimum 0.1ppb |
Response time(T95) |
40sec @ 500ppb |
Data update rate |
0.1 sec – 100 min |
Data average time |
0.1 sec – 25500 min |
Accuracy |
±1% @100ppb-100 ppm |
Sampling update rate |
1 sec – 24 hr |
Sampling flow |
1.0 - 1.5 L/min (including pump) |
Size |
250×200×62 (mm) (L×W×H) |
Weight |
1.5 kg (including ozone filter) |
Power |
DC 12 V, 1.5A max.@100-240VAC 50/60Hz |
Working temperature |
0~40 ℃ |
Working pressure |
700~780 mmHg |
Digital output |
USB (temperature/pressure/concentration) |
Alarm output |
LED (particulate filter/laser source/ozone filter/calibration) |
Accessories
Standard accessories:
Calibration report |
*1 |
Operation manual |
*1 |
Silicone tube |
0.5m |
USB cable |
*1 (1m) |
DC12V 1.5A Max. Transformer |
*1 |
Optional accessories:
USB to RS485 transfer cable |
*1 (for calibration) |
Basic software CD |
*1 (for calibration) |
Advanced Software CD |
*1 (for calibration and reading/recording concentration data) |
Product Sampling Instructions
The high-pressure air source is suggested to be tapped with a T pipe, and the pressure should not be too high to avoid the pipeline loosening during operation. The dry air source after condensation should be used to avoid moisture contamination of the pipe fittings.